Roller Shutter Technical Documents from RFQ to Handover

A supplier has priced six shutters. On the drawing for the loading bay, the motor sits on the right. On site, a pipe occupies that space. Which version should the factory use? Good roller shutter technical documents let the buyer answer that question with an opening ID, a drawing revision and an approval date.

Start with a door schedule at inquiry, release a coordinated drawing before fabrication, and give facilities staff the records for the door they actually receive. Agree at the outset who supplies, reviews and keeps each file.

Which roller shutter technical documents belong at each stage?

StageFile to requestWho uses it and why
InquiryOpening survey and door scheduleSite team confirms measured sizes and flags estimates before the buyer requests pricing.
Design reviewShop drawing and specification sheetSupplier identifies the proposed build. Buyer routes open questions to the responsible designer or site lead.
Production releaseApproved drawing and change recordNamed approver releases a specific revision for the listed openings.
HandoverAs-installed information, manuals and commissioning recordInstaller records what was fitted and checked. Facilities team receives the matching file and outstanding actions.

Use this table to agree which roller shutter technical documents belong in the order. A replacement shutter in an existing opening may need only a few files. A multi-door building may need separate approval routes for structure, power and controls. Write the agreed deliverables and their due dates into the purchase scope.

At inquiry, give each opening an identity

Engineer reviewing roller shutter technical documents beside a concrete loading-bay opening
Illustrative rendering. Record the opening ID and viewing side on the survey drawing.

Mark each opening on the plan and carry that ID into the door schedule. For each aluminum roller shutter door, record the clear opening width and height, the available space above and beside it, and which side the surveyor was facing. Pair photos with their opening IDs. Mark dimensions taken from plans as estimates until someone checks the finished opening.

If you are still collecting dimensions and site photos, the roller shutter quotation guide lists the inputs for pricing. In the roller shutter technical documents, keep a short list of assumptions that affect the order. Give each open item an owner and a date for confirmation.

Before production, agree on one drawing revision

Aluminum shutter slat and guide samples on a roller shutter shop drawing
Illustrative rendering. Match the slat and guide shown on the drawing to the agreed specification.

Read roller shutter shop drawings alongside the door specification sheet. The elevation should identify the opening, mounting side and viewing direction. A section should show how the guides and head assembly sit against the building. Check that the curtain, finish, operator and agreed controls in the specification correspond to the drawing for that door.

A general arrangement drawing can help a designer reserve space. The factory needs to know which revision the project team has released for fabrication. On the cover sheet for the roller shutter technical documents, identify the released drawing number, revision, date, opening IDs and approver. Where a support or electrical connection is outside the door supplier’s scope, name the party responsible for confirming it.

Suppose the pipe at the loading bay forces a change of motor side. Mark the pipe on the plan and send the question to the drawing author. Have the responsible parties check the revised layout and power entry. Once approved, replace the superseded issue in the production pack and tell the installer which revision to use. Check whether the change also affects price or lead time before release.

Ask for evidence that applies to the selected door

Some projects specify a performance rating or require a declaration for a particular market. Quote the clause or requirement when you ask for evidence. Check the document issuer, product designation, scope and any limits against the selected configuration. A certificate carrying the manufacturer’s name alone cannot establish that the ordered door meets the project requirement.

Keep applicable evidence with the roller shutter technical documents for the relevant openings. If the proposed size or configuration falls outside the evidence supplied, send the discrepancy to the responsible project reviewer before accepting the substitution.

At handover, match the manual to the installed equipment

Installer and facility manager reviewing a maintenance binder beside a closed aluminum shutter
Illustrative rendering. At handover, match the manual to the door and operator in front of you.

Receiving staff can use the bulk-delivery inspection checklist to document what arrived. The handover file serves a later decision. Can the facilities team identify the installed operator, find the correct instructions and see who closed an outstanding defect?

Walk through one opening with the installer. Compare the identifier on the door or equipment label with the schedule and operation and maintenance manual. Ask for the applicable wiring information for powered equipment and the commissioning record showing the checks completed, date, responsible person and any open items. Qualified personnel should handle electrical work and adjustments under the applicable instructions.

File changes made on site with the roller shutter technical documents. If an operator was substituted, include the accepted change, the model actually fitted and its manual. Flag unresolved items with a responsible person and target date so the facilities team knows what still needs attention.

A document request you can put in the order

“Please list the roller shutter technical documents included for each opening, the revision offered for approval, the person responsible for release and the files due at handover. Identify any project-specified evidence that requires separate confirmation.”

When you send SEPPES your project inquiry, attach the latest opening schedule and identify one drawing or approval question you need resolved. Include the required document language or file format if your project team specifies one. That gives the supplier a concrete basis for confirming the document scope in its offer.

Scroll to Top